Canon EOS 5D Mark IV L-series Zoom Lens Kit 사용자 매뉴얼

W-45

Saving Images



If necessary, also read “NFC Function Cautions” (p.W-17).



While saving images, a picture cannot be taken even if the camera’s 
shutter button is pressed.



Do not drop the camera on Connect Station or touch the camera to it with 
too much force. Doing so may damage Connect Station’s internal hard 
disk.



If the camera is not recognized right away, try holding it close to Connect 
Station and slowly moving it or rotating it horizontally.



Just holding the camera close to Connect Station may not establish a 
connection. In such a case, gently touch Connect Station with the 
camera.



When holding the camera close to Connect Station, do not leave 
anything between the camera and Connect Station. In addition, when a 
case is attached to the camera, communication may not be possible via 
NFC function.



If the camera and Connect Station are moved too far away from each 
other while saving images, saving may take time or the connection may 
be terminated.



If the camera’s battery runs out while saving images, saving will stop. 
Charge the battery, then try again.



4K movies cannot be played back with Connect Station.



When all images are already saved, saving will not be performed. In 
such a case, select [OK] to terminate the connection.



When there are a large number of images on the memory card, it may 
take time to check and save the images.



While saving images, the camera’s auto power off does not function.