Canon EOS 5D Mark IV L-series Zoom Lens Kit 사용자 매뉴얼
101
Using EOS Utility
On the [DWi-Fi on] screen,
select [Disconnect,exit].
select [Disconnect,exit].
If the [DWi-Fi on] screen is not
displayed, select the [54] tab 9
[Communication settings] 9
[Built-in wireless settings] 9
[Wi-Fi function].
displayed, select the [54] tab 9
[Communication settings] 9
[Built-in wireless settings] 9
[Wi-Fi function].
Select [Disconnect,exit], then select
[OK] on the confirmation dialog to
terminate the connection.
[OK] on the confirmation dialog to
terminate the connection.
Terminating the Connection
When the wireless connection is terminated while recording a movie with
remote shooting, the camera responds as follows:
• When the Live View shooting/Movie shooting switch is set to <k>,
remote shooting, the camera responds as follows:
• When the Live View shooting/Movie shooting switch is set to <k>,
movie shooting continues.
• When the Live View shooting/Movie shooting switch is set to <A>,
movie shooting stops.
When the Live View shooting/Movie shooting switch is set to <A> and
the movie mode is set using EOS Utility, you cannot shoot by operating
the camera.
the movie mode is set using EOS Utility, you cannot shoot by operating
the camera.
While connected, some menu items are unavailable.
In remote shooting, the AF speed may become slower.
Depending on the connection status, image display or shutter release
may be delayed.
may be delayed.
In Remote Live View shooting, the rate of image transmission is slower
compared to a connection via an interface cable. Therefore, moving
subjects cannot be displayed smoothly.
compared to a connection via an interface cable. Therefore, moving
subjects cannot be displayed smoothly.
The wireless connection will stop if you set the camera’s power to <2>
or open the card slot cover or battery compartment cover.
or open the card slot cover or battery compartment cover.