Sony XBR-65A1E 사용자 매뉴얼

Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).

Wall-Mount Bracket
(not supplied)

Screw
(not supplied)

Note

• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.

Detaching the Table-Top Stand from the TV

To detach the Table-Top Stand from the TV, remove the screws

Note

• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the

TV.

• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV

with the panel facing down.

• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the

original holes on the rear of the TV.