CRUX RVCTY-71 Backup Camera System 사용자 매뉴얼

 

 

 

2012 - 2014  
2012 - 2013 

 

 
Camry 
Prius 

 

2012 - 2013  
2012 - 2014

 

 

Tundra 
Venza

 

 

 

 

 

TY-71 T-Harness 

CUL-04 Camera 

1.

 Open trunk and remove trunk door liner by removing the plastic snap rivets.  

2.

 Remove lip panel where the camera will be mounted to. 

3.

 Drill a hole at the center of the lip panel using the hole saw provided.  

4.

 Attach the double-sided weather strip to the screw base of the camera prior to mounting and run the camera 

cable into the hole. 

5.

 Insert the screw base through the cable and screw on the camera to the lip panel. 

6.

 Mate the 4-pin male barrel connector of the camera cable to the extension cable. 

7.

 Run extension cable towards the back of the factory radio. 

8.

 Remove the factory radio from the dashboard and unplug the factory 16-Pin connector from the OEM radio. 

9.

 Mate the Crux 16-Pin T-harness between the OE harness and radio then plug in the Yellow RCAs. 

10.

 

Test the camera, then re-install the radio into the dash.

 

 

1  

rev.030317