AudioControl LCQ-1 사용자 매뉴얼
page 3
Pre-Amp Outputs: These are the RCA plugs on the output side and
should be connected to the next component after the LCQ-1, such as a
crossover or amplifier. Do not connect any speakers directly to your LCQ-
1.
crossover or amplifier. Do not connect any speakers directly to your LCQ-
1.
Output Levels: These knobs allow you to adjust the signal level from
your source unit to match the input of your after-market amplifiers. Most
factory-installed source units have relatively high signal voltage output,
which will require you to decrease the signal level.
factory-installed source units have relatively high signal voltage output,
which will require you to decrease the signal level.
Channel Summed Indicators: Under the cover of your LCQ-1 are
jumpers that will allow you to sum selected channels into the main (#1)
channels. This is especially useful for factory-installed systems with
actively crossed over speaker systems. These indicator LED’s let you
know which channels are being summed into the main inputs.
channels. This is especially useful for factory-installed systems with
actively crossed over speaker systems. These indicator LED’s let you
know which channels are being summed into the main inputs.