Sony STR-DN1080 사용자 매뉴얼
54
GB
5
Update the software.
“UPDATING” flashes on the display panel
during the software update process.
However, “UPDATING” may disappear
temporary during updating.
during the software update process.
However, “UPDATING” may disappear
temporary during updating.
When the update is completed,
“COMPLETE” appears on the display
panel and the receiver restarts
automatically.
“COMPLETE” appears on the display
panel and the receiver restarts
automatically.
It may take about 1 hour for the update to be
completed.
completed.
You cannot restore the old version after updating
the software.
the software.
Set [Auto Update] to [On] when you want to
perform software updates automatically.
Depending on the contents of the updates,
software update may be performed even if you set
[Auto Update] to [Off].
perform software updates automatically.
Depending on the contents of the updates,
software update may be performed even if you set
[Auto Update] to [Off].
Troubleshooting
If a problem occurs while operating the
receiver, check the following to resolve the
problem before consulting your nearest Sony
dealer.
receiver, check the following to resolve the
problem before consulting your nearest Sony
dealer.
Check to see if the problem is listed in this
“Troubleshooting” section.
“Troubleshooting” section.
Visit the Help Guide for detailed examples.
You can search by a keyword using the
online troubleshooting guide.
You can search by a keyword using the
online troubleshooting guide.
For the customers in Europe:
http://rd1.sony.net/help/ha/strdn108/
h_eu/
http://rd1.sony.net/help/ha/strdn108/
h_eu/
For the customers in other areas:
http://rd1.sony.net/help/ha/strdn108/
h_zz/
http://rd1.sony.net/help/ha/strdn108/
h_zz/
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
above, consult your nearest Sony dealer.
The receiver is turned off automatically.
If [Auto Standby] is set to [On], set it to [Off].
The sleep timer function was activated.
“PROTECTOR” was activated.
The indicator on the display panel turns off.
If the PURE DIRECT indicator on the front
panel lights up, press PURE DIRECT to turn
off this function.
panel lights up, press PURE DIRECT to turn
off this function.
Press DIMMER on the receiver to adjust the
brightness of the display panel.
brightness of the display panel.
No image appears on the TV screen.
Try pressing the input button on the remote
control or turning INPUT SELECTOR on the
receiver to select the input to which you
want to listen.
control or turning INPUT SELECTOR on the
receiver to select the input to which you
want to listen.
Set your TV to the appropriate input mode.
Move your audio device away from the TV.
Make sure that cables are correctly and
securely connected to devices.
securely connected to devices.
Disconnect the HDMI cable from the
receiver and TV and then reconnect the
cable.
receiver and TV and then reconnect the
cable.
Note
General
Video