Sonos PLAY:3 사용자 매뉴얼

SONOS PLAY:3

11

• Be sure that your cable/DSL modem is connected to the router’s WAN (Internet) port. 

• Temporarily remove any other components that are wired to your network. 

• Connect an Ethernet cable from the computer directly to the back of the Sonos component, and then connect another 

 

Ethernet cable from the Sonos component directly to one of the LAN ports on your router. 

• When you make a change to your network configuration, you may need to power cycle the Sonos component by un-

plugging the power cord, and then plugging it back in.

• If you are not using a router, you can visit our Web site at http://faq.sonos.com/norouter for more information.

Check the link/activity lights on both the router and the Sonos component. The link lights should be lit solid and the activity 
lights should be blinking. 

• If the link lights are not lit, try connecting to a different port on your router. 

• If the link lights still do not light, try connecting a different Ethernet cable.

You are probably experiencing wireless interference. Change the wireless channel your Sonos system is operating on by 
following the steps below. If this does not resolve the problem, please contact the Sonos Customer Support team and we’ll be 
glad to help.

Change the wireless channel your Sonos system is operating on.

• Using the Sonos Controller for Mac or PC: From the 

File (PC) or Sonos (Mac) menu, select Preferences. Click the Ad-

vanced tab, and select another wireless channel from the Wireless Channel list.

• Using the SONOS CONTROL: Touch 

Music Menu -> Settings -> Advanced Settings. Touch Wireless Channel and then 

choose another wireless channel from the list.