Netgear AC1200 사용자 매뉴얼

Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.

Auto Config. This is the default setting.

(Optional) Select the Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC 
address.

Click the Apply button.

The remote relay router is the router to which your router creates the 6to4 tunnel. Make sure 
that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the 
IPv6 connection.



Select ADVANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

In the Internet Connection Type list, select 6to4 Tunnel.

The screen adjusts:

The router automatically detects the information in the following fields:

Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no 
address is acquired, the field displays Not Available.

Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. If no address is 
acquired, the field displays Not Available.