Netgear AC1600 사용자 매뉴얼

The screen adjusts: 

The router automatically detects the information in the following fields:

Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the 
length of the prefix, which is also indicated by the underline (_) under the IPv6 
address. If no address is acquired, the field displays Not Available.

Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. If no address is 
acquired, the field displays Not Available.

In the Login fields, enter the login information for the ISP connection.

This is usually the name that you use in your email address. For example, if your main 
mail account is JerAB@ISP.com, then you would type JerAB in this field. Some ISPs (like 
Mindspring, Earthlink, and T-DSL) require that you use your full email address when you 
log in. If your ISP requires your full email address, type it in this field.

In the Password field, enter the password for the ISP connection.

In the Service Name name field, enter a service name.

If your ISP did not provide a service name, leave this field blank.

The default setting of the Connection Mode field is Always on to 
provide a steady IPv6 connection. The router never terminates the 
connection. If the connection is terminated, for example, when the 
modem is turned off, the router attempts to reestablish the connection 
immediately after the PPPoE connection becomes available again.

Specify how the router assigns IPv6 addresses to the devices on your home network (the 

LAN) by selecting one of the following radio buttons: