Netgear AC1600 사용자 매뉴얼
USB Storage
44
R6250 Smart WiFi Router
Connect a USB Storage Device to the Router
ReadySHARE lets you access and share or a USB drive connected the router USB port. If
your USB device has special drivers, it is not compatible.
your USB device has special drivers, it is not compatible.
To connect a USB storage device:
1.
Insert your USB storage device into the USB port on the rear panel of the router.
2.
If your USB device has a power supply, you must use it when you connect the USB device
to the router.
It might take up to 2 minutes before the USB device is ready for sharing.
Safely Remove a USB Drive
If you want to physically disconnect a USB drive from the router USB port, first, log in to the
router and safely remove it.
router and safely remove it.
To remove a USB disk drive safely:
1.
Select USB Storage > Basic Settings.
2.
Click the Safely Remove USB Device button.
This takes the drive offline.
3.
Physically disconnect the USB drive.
Access the USB Storage Device
When you connect the USB device to the router USB port, it might take up to 2 minutes
before it is ready for sharing. By default, the USB storage device is available to all computers
on your local area network (LAN).
before it is ready for sharing. By default, the USB storage device is available to all computers
on your local area network (LAN).
To access the USB device from a Mac:
1.
Select Go > Connect to Server.
2.
Enter smb://readyshare as the server address.
3.
Click Connect.