Netgear AC1600 사용자 매뉴얼

The router front panel has the status LEDs and icons shown in the following figure.

Power

Solid amber. The router is starting.

Blinking amber. The firmware is upgrading, or the Restore Factory Settings button was 
pressed.

Solid green. The router is ready.

Blinking green. The firmware is corrupted. See 

Off. Power is not supplied to the router.

Internet

Solid green. The Internet connection is ready.

Solid amber. The Ethernet cable connection to the modem has been detected.

Off. No Ethernet cable is connected to the modem.

Wireless

Solid blue. The wireless radio is operating in either 2.4 GHz or 5 GHz mode.

Blinking. Someone is trying to join the WiFi network using the WPS method. 

Off. The wireless radios are off for both 2.4 GHz and 5 GHz.

USB

Solid blue. The router has accepted the USB device. The USB device is ready to be used. 

Blinking blue. A USB device is plugged in and is trying to connect. 

Off. No USB device is connected; someone clicked the Safely Remove Hardware button, and 
it is now safe to remove the attached USB device.