Netgear AC1750 사용자 매뉴얼
Supplemental Information
101
AC1750 WiFi Cable Modem Router
Factory Default Settings
To return the modem router to its factory settings, press and hold the Reset button for over
seven seconds. The modem router resets and returns to the factory configuration settings
shown in the following table.
seven seconds. The modem router resets and returns to the factory configuration settings
shown in the following table.
Table 4. Factory default settings
Feature
Default Setting
Modem router
login
login
User login URL
http://192.168.0.1
User name and password
(case-sensitive)
(case-sensitive)
admin / password
Local network
(LAN)
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
Firewall
Inbound communication from the
Internet
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Internet
Enabled (all)
Source MAC filtering
Disabled
Internet
connection
connection
WAN MAC address
Use default hardware address
Wireless
Wireless communication
Enabled
SSID name
As shown on the product label
Security
WPA/WPA2. The default WPA/WPA2 passphrase is
on the product label.
on the product label.
Broadcast SSID
Enabled
Transmission speed
Auto
1
Country/region
United States in the US; otherwise, varies by region
RF channel
Auto
Operating mode
a, n, g, b, and ac
Data rate
Best
Output power
Full
Access point
Enabled