Netgear AC1750 사용자 매뉴얼

March 2014

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered 
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. 
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.

1.  Contact your cable Internet provider and inform them that you are 

installing a new modem router that you bought from a retail store. 

Provide your cable Internet provider with the modem router’s model 
number, which is C6300. 

Note: 

The modem router is certifi ed by all major cable Internet 

providers.

You can also visit your cable Internet provider’s website and follow the 
onscreen instructions to set up your Internet service.

1-888-438-2427

1-800-COMCAST (1-800-266-2278)

1-877-891-2899

1-800-892-2253

Note: 

Your cable Internet provider’s contact information might change. 

You can also fi nd the contact number in your monthly Internet service 
billing statement.

2.  When asked, provide the modem router’s serial number and MAC 

address on the product label.

3.  Wait for your cable Internet provider to confi rm that your 

modem router is active.

4.  If you do not have an Internet connection with the modem router, ask 

your cable Internet provider to look for your modem router online, then 
do one of the following depending on what your cable Internet provider 
tells you about your modem router:

•  If the modem router is not visible, your cable Internet provider can 

give you instructions to verify why the modem router does not 
connect with your high-speed Internet service.

•  If the modem router is visible to your cable Internet provider, reboot 

the modem router. Try checking your online status again.

To connect your computer or WiFi device (such as a smartphone or gaming 
device) to your modem router’s WiFi network, you can use either the 
manual method or Wi-Fi Protected Setup (WPS) method.

1.  Open the soft ware utility that manages your WiFi connections on 

the computer or WiFi device that you want to connect to your 
modem router.

This utility scans for all wireless networks in your area. 

2.  Find and select your modem router’s WiFi network name (SSID).

The SSID is on the product label.

3.  Enter the modem router’s password (or your custom password if you 

changed it) and click the Connect button.

The password is on the product label.

4.  Repeat Step 1 through Step 3 to add other computers or WiFi devices.

If your computer or WiFi device supports WPS, you can use WPS to join the 
modem router’s WiFi network. For help with the WPS button on your computer 
or WiFi device, check the instructions or online help that came with that 
computer or WiFi device. Some older equipment cannot use WPS.

Note: 

WPS does not support WEP security. If you are using WEP security, use 

the manual method.

1. Press 

the 

WPS button on the modem router.

2.  Within two minutes, on your computer or WiFi device, press its WPS button 

or click its onscreen WPS button.

The WPS LED on the modem router lights solid green and the computer or 
WiFi device connects to your modem router. 

3.  Repeat this process to add other computers or WiFi devices.

Thank you for purchasing this NETGEAR product. Aft er installing your device, 
locate the serial number on the label of your product and use it to register your 
product at 

. 

You must register your product before you can use NETGEAR telephone 
support. NETGEAR recommends registering your product through the NETGEAR 
website. For product updates and web support, visit 

. NETGEAR recommends that you use only the 

offi

  cial NETGEAR support resources. 

For regulatory compliance information, visit 

.

See the regulatory compliance document before connecting the power supply.

Customer-owned modem routers might not be compatible with certain cable 
networks. Check with your cable Internet provider to confi rm this NETGEAR 
modem router is allowed on your cable network.