Netgear AC1900 Nighthawk™ 사용자 매뉴얼

If NETGEAR genie detects that the router is connected to another router or gateway, 
NETGEAR genie prompts you to set up the router in router mode or access point 
mode:

Select the Help Me Choose radio button or Let Me Choose radio button:

Help Me Choose. If you select the Help Me Choose radio button, NETGEAR 
genie asks you a few questions to determine if you should set the router in router 
mode or access point mode. NETGEAR recommends that you select the Help Me 
Choose radio button.

Let Me Choose. If you select the Let Me Choose radio, you must select the 
Router Mode radio button or the Access Point Mode radio button. You can 
change the mode by running the Setup Wizard again. For more information, see 

For more information about how to set up your router with an existing router or 
gateway, see 

135.

If you already used the NETGEAR genie, enter http://www.routerlogin.net in the 
address field for your browser to display the NETGEAR genie page. 

Follow the onscreen instructions.

NETGEAR genie guides you through connecting the router to the Internet. 

If the browser cannot display the web page, do the following: 

Make sure that the computer is connected to one of the four LAN Ethernet ports or 
wirelessly to the router.

Make sure that the router has full power, and that its Power LED is lit white.

Close and reopen the browser or clear the browser cache.

Browse to

If the computer is set to a static or fixed IP address (this setting is uncommon), 
change it to obtain an IP address automatically from the router.

If the router does not connect to the Internet, do the following:
a. Review your settings. Make sure that you selected the correct options and typed 

everything correctly. 

b.  Contact your ISP to verify that you have the correct configuration information.