Netgear AC2300 Nighthawk™ 사용자 매뉴얼
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and
hold the Reset button on the back of the router for at least seven seconds. The router resets and returns
to the factory configuration settings shown in the following table.
hold the Reset button on the back of the router for at least seven seconds. The router resets and returns
to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Default Setting
Feature
www.routerlogin.com or www.routerlogin.net
User login URL
Router login
admin
User name (case-sensitive)
password
Login password (case-sensitive)
Use default hardware address
WAN MAC address
Internet
connection
connection
1500
WAN MTU size
AutoSensing
Port speed
192.168.1.1
LAN IP
Local network
(LAN)
(LAN)
255.255.255.0
Subnet mask
Enabled
DHCP server
192.168.1.2 to 192.168.1.254
DHCP range
Pacific time for NA
GMT for WW
Time zone
192.168.1.2
DHCP starting IP address
192.168.1.254
DHCP ending IP address
Disabled
DMZ
Disabled
Time adjusted for daylight saving
time
time
Disabled
SNMP
Disabled (except traffic on port 80, the HTTP port)
Inbound (communications coming
in from the Internet)
in from the Internet)
Firewall
Enabled (all)
Outbound (communications going
out to the Internet)
out to the Internet)
Disabled
Source MAC filtering
Supplemental Information
151
Nighthawk AC2300 Smart WiFi Router