Netgear AC2300 Nighthawk™ 사용자 매뉴얼

Quick Start

Model R7000P

Unplug your modem, remove and replace the backup battery if it uses one, and 
then plug the modem back in. Use the Ethernet cable to connect the modem to 
the yellow Internet port on the router.

Note: 

If your Internet connection does not require a modem, connect your 

main Ethernet cable to the yellow Internet port on the router.

Connect the router to a power source. The router’s Power LED 

 lights amber 

and then turns white when the router is ready. 

Make sure that the router’s WiFi LED 

 is lit. Look on the router label for the 

preassigned WiFi network name (SSID) and network key (password).

Open the WiFi connection manager on your WiFi-enabled computer or mobile 
device, find the router’s WiFi network name, and use the router’s password to 
connect.

Launch a web browser. If the NETGEAR installation assistant does not display, visit 

. If a login window displays, enter admin for the user name 

and password for the password.

Follow the onscreen instructions to connect to the Internet.

The Internet LED 

 lights solid white when the router connects to the Internet.

Remove the antenna caps from the antenna posts on the router.

Attach and tighten the antennas on the threaded antenna posts.

Position the antennas as shown.

45°

45°