Netgear Orbi AC2200 Tri-band Wi-Fi® System (RBK40) 사용자 매뉴얼

Set up your router and satellite using one of 
the following options:

NETGEAR Orbi app. Follow these steps: 

a.  Scan a QR code or search for 

NETGEAR Orbi in the Apple App 
Store or Google Play Store.

b.  Download and launch the NETGEAR 

Orbi app on your mobile device and 
follow the prompts.

After the satellite is powered on, the 
satellite’s ring LED lights white while the 
satellite attempts to sync with the router. 
Then the ring LED lights one of the following 
colors for about three minutes and then 
turns off:

Quick Start Guide

The connection between the 
satellite and router is good.

The connection between the 
satellite and router is fair. Consider 
moving the satellite closer to the 
router.

The satellite was unable to connect 
to the router. Move the satellite 
closer to the router.

Note: 

If the ring LED lights 

magenta after about one minute, 
press the Sync button on the 
router and satellite. If the satellite 
successfully syncs with the router, 
the satellite’s ring LED lights white. 
Then the ring LED lights blue to 
indicate a good connection and then 
turns off.

Satellite Sync LED Colors

NETGEAR INTL LTD  
Building 3, University Technology Centre  
Curraheen Road, Cork, Ireland 

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA

© NETGEAR, Inc., NETGEAR and the NETGEAR Logo 
are trademarks of NETGEAR, Inc. Any non-NETGEAR 
trademarks are used for reference purposes only.

March 2017

Set Up Your Orbi Router 
and Satellite

browser. Follow these steps:

a.  Unplug your modem and remove 

and reinsert the backup battery if it 
uses one.

b.  Plug the modem back in.

c.  Use the included Ethernet cable to 

connect your modem to the yellow 
Internet port on your router.

Note: 

If you want to connect your 

router to an existing gateway, we 
recommend that you turn off your 
existing gateway’s WiFi.

d.  Plug in your router. 

The Power LED on the back of the 
router lights green. If the Power 
LED does not light, press the  
Power On/Off button.

e.  Wait for the router’s ring LED to 

light white.

f. 

Place your satellite, plug it in, and 
wait for the satellite’s ring LED to 
light blue or amber.

If the satellite’s ring LED lights 
magenta, move the satellite closer 
to the router.

For more information, see 

.

g.  Connect your computer or mobile 

device to the router or satellite with 
an Ethernet or WiFi connection:

• Ethernet. Use an Ethernet cable 

to connect your computer to 
the router or satellite. 

• WiFi. Use the preset WiFi 

network name (SSID) and 
password on the label of the 
router or satellite to connect to 
the Orbi WiFi network.

h.  Launch a web browser, visit 

, and follow the 

prompts.

If a login window opens, enter the 
user name and password. The user 
name is admin and the default 
password is password.