Netgear Nighthawk™ X10 사용자 매뉴얼

The status LEDs are located on the top of the router. The USB ports are located on the side of the router.

The four active antennas include LEDs. If the LEDs on the active antennas are lit, the WiFi radios are
operating.

Figure 2. Front view

Solid white. The router is ready.

Blinking white. The router is not ready, firmware is upgrading, or the Reset button was
pressed.

Off. Power is not supplied to the router.

Power

Solid white. An Ethernet connection is established.

Blinking white. The port is sending or receiving traffic.

Off. No Ethernet cable is connected between the router and the modem.

Internet