JBL Commercial JBL CSMA 280 사용자 매뉴얼

다운로드
페이지 34
4
IMPORTANT SAFETY INFORMATION
ELECTROMAGNETIC
COMPATIBILITY
 
This device complies with part 15 of the FCC Rules and the 
Product specifications noted on the Declaration of Conformity. 
Operation is subject to the following two conditions:
s   this device may not cause harmful 
interference, and 
s   this device must accept any interference received, including 
interference that may cause undesired operation.  
Operation of this unit within significant 
electromagnetic fields should be avoided.
s  use only shielded interconnecting cables.
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off from the cord is 
unsafe. Discard the mains plug at a suitable disposal facility. 
NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT 
A DAMAGED OR CUT MAINS PLUG INTO A 13 AMP POWER 
SOCKET. Do not use the mains plug without the fuse cover in 
place.  Replacement fuse covers can be obtained from your local 
retailer.  Replacement fuses are 13 amps and MUST be ASTA 
approved to BS1362.
If you want to dispose this product, do not mix it with gen-
eral household waste. There is a separate collection system 
for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling.
Private household in the 25 member states of the EU, in Switzerland 
and Norway may return their used electronic products free of charge to 
designated collection facilities or to a retailer (if you purchase a similar 
new one).
For Countries not mentioned above, please contact your local authorities 
for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the 
necessary treatment, recovery and recycling and thus prevent potential 
negative effects on the environment and human health.
MAGNETIC FIELD
CAUTION!  Do not locate sensitive high-gain equipment such as preamplifiers 
or tape decks directly above or below the unit. Because this amplifier has a 
high power density, it has a strong magnetic field which can induce hum into 
unshielded devices that are located nearby. The field is strongest just above 
and below the unit.
If an equipment rack is used, we recommend locating the amplifier(s) in 
the bottom of the rack and the preamplifier or other sensitive equipment 
at the top.