DJI Osmo Car Mount 사용자 매뉴얼
3. Attach the Osmo handle to the Vehicle Mount and then tighten the screw
to secure. The position of the Osmo handle can be adjusted by loosening
the knob on the universal joint.
the knob on the universal joint.
Ensure the base lock is in the unlocked position before unscrewing
the universal joint.
the universal joint.
WARNING
&OTVSFUIF7FIJDMF.PVOUJTNPVOUFEPOBnBUBOEDMFBOTVSGBDF'BJMVSF
to do so may cause the suction cups to perform poorly and result in the
Vehicle Mount falling off.
Vehicle Mount falling off.
2. Ensure the Vehicle Mount is mounted securely and will not fall off.
3. Be observant and check for signs of looseness during your ride.
4. The suction cups may perform poorly in low temperature environments.
3. Be observant and check for signs of looseness during your ride.
4. The suction cups may perform poorly in low temperature environments.
DO NOT use the Vehicle Mount if it shows signs of looseness.
5. Bring the Osmo inside of the vehicle if you are travelling at speeds over
100 km/h. Otherwise, the gimbal may enter Protection mode and become
inactive.
inactive.
The content is subject to change.
Download the latest version from
www.dji.com/product/osmo
If you have any questions about this document, please contact
DJI by sending a message to DocSupport@dji.com.
©
2015 DJI. All Rights Reserved.
1
2