Lexicon MX300 사용자 매뉴얼
MX300
51
sPeCIfICaTIons
Analog Audio Inputs
Connectors
Connectors
two XLR and two ¼" TRS balanced or unbalanced
Impedance
50k Ohms bal., 25k Ohms unbal.
Input Level
+4 dBu nominal, +24 dBu maximum
A/D Conversion
24-bit, 48kHz or 44.1kHz, 128 x oversampling
Analog Audio Outputs
Connectors
Connectors
two XLR and two ¼" TRS balanced or unbalanced
Impedance
2k Ohms bal., 1k Ohms unbal.
Output Level
+4 dBu or –10 dBV nominal (software adjustable), 24 dBu maximum
D/A Conversion
24-bit, 48kHz or 44.1kHz, 128 x oversampling
Analog Audio Performance (Effects Bypassed)
Frequency Response
Frequency Response
10 Hz – 20kHz +0 dB/–0.5 dB
THD+N
<0.0019% 10Hz – 20kHz
Dynamic Range
>109 dB (A-weighted) A/A
Crosstalk
typical < –80 dB 20Hz – 20kHz
Digital Input and Output
Connectors
Connectors
RCA phono (S/PDIF)
Format
S/PDIF 24-bit
Sample Rate
44.1 or 48kHz
Frequency Response
10Hz to 22kHz ±0.5 dB @ 48kHz
Control Interface
USB
USB
USB 1.1 for MX-EDIT™ Editor/Librarian and VST™/Audio Units plug-ins
MIDI
In/Out 5-pin DIN
Foot Pedal
¼" TRS phone jack
General
Size (W/H/D)
Size (W/H/D)
19" x 1.75" x 7.25"*/6.375"
(483 x 44 x /185mm*/162 mm)
Weight
5.8 lbs (2.6 kg)
Operating Voltage:
100-120 VAC 50/60 Hz -EU 220-240 VAC 56/60 Hz
Power Requirements
18 Watts
The MX300 is manufactured to operate from a specific supply voltage. There are two different models, one
which accepts 100V-120V, and another which accepts 220V-240V mains. All units sold in North America are for
100V-120V only. You cannot operate a 100V-120V MX unit using 220V-240V power. The supply voltage is marked
on the back of the unit.
which accepts 100V-120V, and another which accepts 220V-240V mains. All units sold in North America are for
100V-120V only. You cannot operate a 100V-120V MX unit using 220V-240V power. The supply voltage is marked
on the back of the unit.
Model
Operating Voltage
Power Requirements
MX300
100-120 VAC 50/60 Hz
18 Watts
MX300-EU
220-240 VAC 56/60 Hz
18 Watts
* Including knobs.
Specifications