Clarion CMS4 사용자 매뉴얼
6. TROUBLESHOOTING
Problem
Problem
Cause
Cause
Measure
Measure
The unit will
not power on
not power on
Cannot pair the
Bluetooth enabled
device with the
audio system.
Bluetooth enabled
device with the
audio system.
No sound
The audio quality is
poor after connection
with a Bluetooth-
enabled device.
The remote is
responding
responding
not
Auto seek function
can not find any
stations
can not find any
stations
Volume is set too low
Wiring is not properly
connected
connected
The Bluetooth reception is poor.
The built-in internal processor
is not operating properly
is not operating properly
The antenna cable is not
connected
connected
The signals are too weak
Increase the volume to audible level
Correct wiring connections
Hold the Power / SRC button and select
Power Off. Press the Power / SRC button to
power back on and check if the remote is
functioning properly.
Power Off. Press the Power / SRC button to
power back on and check if the remote is
functioning properly.
Insert the antenna cable securely
Select a station manually
The vehicle's accessory
switch is not on
switch is not on
The device does not support
the profiles required for the
system.
The Bluetooth function of the
device is not enabled.
If the power supply is properly connected
to the
to the
accessory terminal, switch the
ignition key to “ACC”
vehicle's
Use another device to connect.
Refer to the user manual of the device for how
to enable the function.
to enable the function.
GENERAL
Bluetooth
Move the device closer to the audio system or
remove any obstacle between the device and
the system.
Problem
Cause
Measure
USB device cannot
be inserted.
be inserted.
USB device is not
recognized.
No sound heard with
the display “No File”
shown.
Sound skips or is
noisy.
The USB device is damaged.
No MP3/WMA file is stored in
the USB device.
the USB device.
MP3/WMA files are not
encoded properly.
encoded properly.
The USB device has been
inserted with wrong
direction.
The USB connector is
broken.
Reversing the connection direction of the USB
device, try it again.
device, try it again.
Replace with a new USB device.
USB
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Connectors are loose.
CMS4
20
English
Owner’s Manual