Fujifilm Instax SQUARE SQ10 사용자 매뉴얼

16

Print an image following the steps below.
•  When the auto print mode is selected, the image will be 

printed immediately after it is taken. (Page 13)

~

Ÿ

⁄

!

Press the 

(Print) button.

The screen below appears.

@

Press the MENU/OK button.

Printing starts.

•  To cancel printing press the 

(Back) button.

¤

Adjust the image effect as necessary.
(Pages 17 and 18)

Q Film remaining indication

Dots on the right of the monitor indicates the number 
of remaining films.
One dot turns gray every time you print an image.

•  When there are only two films left, dots turns 

red.

When the film has been 
ejected (the camera stops 
making a sound), grab the 
edges of the film, then take 
it out.

R You can print an image that is zoomed in or print four 

or nine images on one film. Use the command dial to 
change to the multiple image display on step 2 when 
the image to print is displayed. (Page 15)

•  For details on taking out the film, refer to the instructions and 

warnings on the FUJIFILM Instant Film “instax SQUARE” pack.

•  The development time is approximately 90 seconds. (The 

time varies depending on the ambient temperature.)

Press the 

 (Playback) button.

The most recent image will be displayed.

Press 

8

 or 

9

 to select an image to view.

Pressing 

8

 displays a previous image.

Pressing 

9

 displays a next image.

instax_D-SQ_ENFR_rev.indb   16

2017/5/19   16:29:43