Fujifilm Instax SQUARE SQ10 사용자 매뉴얼
29
EN
TROUBLE SHOOTING
Review below if you think the camera has some trouble. If you cannot find the solution, contact a FUJIFILM
authorized distributor.
Or visit our website below.
authorized distributor.
Or visit our website below.
FUJIFILM website
: http://fujifilm.com/
During operation
Problem
Possible Causes
Solution
The camera cannot be
turned on.
turned on.
① The battery power is low.
② The battery is not inserted correctly.
② The battery is not inserted correctly.
① Charge the battery fully.
② Insert the battery correctly.
② Insert the battery correctly.
The battery runs out
too fast.
too fast.
① You are using the camera in a very
cold place.
② The battery terminals are dirty.
③ You are using the same battery for a
③ You are using the same battery for a
long period of time.
① Put the battery in your pocket to warm it, and
insert it immediately before you use the camera.
② Remove the battery, clean the terminals with a
dry and clean cloth, then reinsert the battery.
③ The battery has reached the end of its charging
life. Replace with a new battery.
The camera turns off
during operation.
during operation.
● The battery is running out.
● Replace with a fully-charged battery.
The battery charge does
not start.
not start.
① The battery is not inserted.
② The battery orientation is wrong.
③ The AC power adapter plug is not
② The battery orientation is wrong.
③ The AC power adapter plug is not
connected to the indoor power
outlet correctly.
outlet correctly.
① Insert the battery.
② Reinsert the battery in the correct orientation.
③ Plug in the AC power adapter to the indoor power
② Reinsert the battery in the correct orientation.
③ Plug in the AC power adapter to the indoor power
outlet correctly.
It takes long to charge
the battery.
the battery.
● You are charging the battery in a
very cold place.
● It may take long to charge the battery when it is
cold.
During the battery
charge, the AF-assist
illuminator/Self timer
lamp flashes, or an error
message appears on the
LCD monitor, indicating
that the battery cannot
be charged.
charge, the AF-assist
illuminator/Self timer
lamp flashes, or an error
message appears on the
LCD monitor, indicating
that the battery cannot
be charged.
① The battery terminals are dirty.
② The battery has reached the end
② The battery has reached the end
of its charging life, or it has broken
down.
down.
③ The battery is too warm or too cold.
① Remove the battery, clean the terminals with a
dry and clean cloth, then reinsert the battery.
Insert it in the correct orientation.
Insert it in the correct orientation.
② Replace with a new battery. If this does not solve
the problem, contact a FUJIFILM authorized
distributor.
distributor.
③ Charge the battery again when the battery is
stable in its temperature.
instax_D-SQ_ENFR_rev.indb 29
2017/5/19 16:29:49