Nikon Coolpix W300 사용자 매뉴얼

다운로드
페이지 310
100
Using Altimeter and Depth Gauge
You can check the atmospheric pressure as well as the altitude or water depth of the 
current position on the screen, and record the displayed values to the captured 
images.
• The altitude, water depth, and atmospheric pressure that are recorded on images 
can be imprinted on the images by using Data imprint (
A76) in the playback 
menu.
• Captured images and related logs can be displayed if you use the altitude or water 
depth log recording functions (
B
Notes About Altimeter and Depth Gauge
• Use Alt./depth correction in Altitude/depth options (A161) in the location data 
options menu to correct the altitude or water depth in advance. Before using the camera 
underwater, make sure to adjust the data to 0 m (0 ft) at the surface of water.
• Do not use the altimeter or depth gauge in this camera for specialized applications such 
as mountain climbing or underwater diving. The displayed information is intended as a 
general guide only.
• Since the altitude is calculated using the camera's internal barometer, the data may not be 
displayed correctly in some climate conditions.
• When the scale of the depth gauge display exceeds 25 m (82 ft), the depth gauge display 
turns orange. When the scale of the depth gauge display exceeds 30 m (98 ft), the depth 
gauge display turns red.
C
Altitude or Water Depth
• The altimeter or depth gauge can be displayed when 
Altimeter/depth gauge in Altitude/depth options in 
the location data options menu is set to On (default 
setting).
• The depth gauge and water depth are displayed when 
you select Underwater scene mode, or select o (scene 
auto selector) mode and then submerge the camera 
underwater. If the camera is not being used underwater 
when Underwater is selected, the depth gauge display 
is fixed at 0 m (0 ft).
• The display range of the altitude is -300 m to +4500 m 
(-984 ft to +14,760 ft), and the display range of the water 
depth is 0 m to 35 m (0 ft to 114 ft).
• When altitude or water depth is corrected, i is displayed next to the altitude or water 
depth.
Using Altimeter and Depth Gauge
40
10
0
-10
30
20
25m 0s
25m 0s
500
500
15m
15m
1010hPa
1010hPa
Atmospheric 
pressure
Altitude or 
water depth
Altimeter or depth gauge