Canon PowerShot SX730 HS 사용자 매뉴얼

116

 

●

When using NFC, keep the following points in mind.

 -

Avoid strong impact between the camera and smartphone. This 
may damage the devices.

 -

Depending on the smartphone, the devices may not recognize 
each other immediately. In this case, try holding the devices 
together in slightly different positions. If connection is not 
established, keep the devices together until the camera screen 
is updated.

 -

If you attempt connection when the camera is off, a message 
may be displayed on the smartphone reminding you to turn on 
the camera. If so, turn the camera on and touch the devices 
together again.

 -

Do not place other objects between the camera and 
smartphone. Also, note that camera or smartphone covers or 
similar accessories may block communication.

 

●

All images in the camera can be viewed from the connected 
smartphone when you choose [Yes] in step 3. To keep camera 
images private, so that they cannot be viewed from the 
smartphone, choose [No] in step 3.

 

●

Once you have registered a smartphone, you can change privacy 
settings for it on the camera (= 139).

 

●

Connections require that a memory card be in the camera.

 

●

You can also change the camera nickname on the screen in step 
2 (= 140).

 

●

You can also send multiple images at once and change the image 
size before sending (= 132).

 

●

To disable NFC connections, choose MENU (= 29) > [ ] tab 
> [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].

 

●

When this screen is displayed, press 

the [ ][ ] buttons or turn the [ ] dial to 

choose [Yes], and then press the [ ] 

button.

 

●

You can now use the smartphone for 

remote live view shooting, or to browse or 

transfer images on the camera.

 

●

Press the [ ][ ][ ][ ] buttons to choose 

[Send this image], and then press the [ ] 

button.

 

●

[Transfer completed] is displayed after 

the image is sent, and the image transfer 

screen is displayed again.

 

●

To end the connection, press the 

[

] button, choose [OK] on the 

confirmation screen (either press the 

[ ][ ] buttons or turn the [ ] dial), and 

then press the [ ] button. You can 

also use the smartphone to end the 

connection.