Canon XA35 사용자 매뉴얼

Appendix: Menu Options Lists

155

[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.

[Set WB Priority]:

You can press an assignable button set to [Ä WB Priority] to switch between the

current white balance and the white balance setting selected for [Set WB Priority].

[Focus Ring Direction]:

Changes the direction the focus/zoom ring needs to be turned. This setting

affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is
set to FOCUS).

[Focus Ring Response]:

Selects the sensitivity of the response when operating the focus/zoom ring.

This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom
ring switch is set to FOCUS).

[Focus Preset Speed]:

Determines the speed at which the focus changes to the preset position.

[Battery Info]:

When you are using a battery pack that is compatible with Intelligent System, this option

displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time (

mode) or playback time (

mode).

• If the battery pack is exhausted, the battery information may not be displayed.

[HDMI Time Code]:

When set to [i On], the HDMI signal output from the camcorder includes the

camcorder's time code.

[HDMI Status]:

Displays a screen where you can verify the standard of the output signal from the HDMI

OUT terminal.

[Output Onscreen Displays]:

When set to [i On], the camcorder’s onscreen displays will appear also

on the screen of a TV or monitor connected to the camcorder.

[Distance Units]:

Selects the units to use for the focusing distance display while focusing manually. This

setting also affects units for GPS information when using the optional GP-E2 GPS Receiver.

[GPS Auto Time Setting]

: When the optional GP-E2 GPS Receiver is attached to the camcorder, you

can have the camcorder automatically set the time based on the information acquired from GPS. For
more details, refer to Setting Time from GPS on the Camera in the receiver's instruction manual.

[GPS Information Display]

: When the optional GP-E2 GPS Receiver is attached to the camcorder, this

function allows you to view GPS information. For more details, refer to Viewing GPS Information in the
receiver's instruction manual.

[MAC Address]

: Displays the camcorder's MAC address.

[Certification Logo Display]:

This displays select certification logos that apply to this camcorder.

• This setting may not be available depending on the country/region of purchase.

[Demo Mode]:

The demonstration mode displays the camcorder’s main features. It starts automatically

when the camcorder is powered with the compact power adapter if you leave it turned on without a
memory card for more than 5 minutes.
• To cancel the demo mode once it has started, press any button or turn off the camcorder.

[Firmware]:

You can verify the current version of the camcorder’s firmware. This menu option is usually

unavailable.

[Reset All]:

Resets all of the camcorder's settings.