Canon XA35 사용자 매뉴얼
Recording Audio
83
Connecting an External Microphone or External Audio Input Source to the
Camcorder
Camcorder
In order to use the microphone holder and INPUT 1/INPUT 2 terminals, the handle unit must be
attached to the camcorder. Follow the procedure below to attach a microphone (refer also to the
following illustration). To connect an external device to the camcorder, plug the device’s cable into the
desired terminal (
attached to the camcorder. Follow the procedure below to attach a microphone (refer also to the
following illustration). To connect an external device to the camcorder, plug the device’s cable into the
desired terminal (
햵).
1 Loosen the microphone lock screw (
햲), open the microphone holder and insert the
microphone (
햳).
2 Tighten the lock screw and put the microphone cable through the microphone cable
clamp under the microphone holder (
햴).
3 Plug the microphone cable into the desired INPUT terminal (
햵) or the MIC terminal (햶).
Using the Built-in Microphone or an External Microphone Connected to the
MIC Terminal
MIC Terminal
Follow the step below to use the built-in microphone or an
external microphone connected to the MIC terminal. Use
commercially available condenser microphones with their own
power supply and a
external microphone connected to the MIC terminal. Use
commercially available condenser microphones with their own
power supply and a
∅ 3.5 mm mini-stereo plug.
Set the INPUT terminal ON/OFF switch to OFF.
• If you connect a microphone to the MIC terminal while the
INPUT terminal ON/OFF switch is set to OFF, the camcorder
will switch automatically from the built-in microphone to the
external microphone.
will switch automatically from the built-in microphone to the
external microphone.
Microphone lock screw
Cable clamp
INPUT 1/INPUT 2 terminals
MIC terminal