Canon XC15 사용자 매뉴얼
Recording Audio
92
Microphone Attenuator (MIC Terminal)
You can activate the microphone attenuator (20 dB) for a microphone
connected to the MIC terminal to prevent audio from being distorted if the
audio level is too high.
connected to the MIC terminal to prevent audio from being distorted if the
audio level is too high.
1 Press the MENU button.
2 Open the [MIC Att.] submenu.
[¡ Audio Setup] > [2] > [MIC Att.]
3 Select the desired option and then touch [X].
Options
Low-Cut Filter (MIC Terminal)
When you are recording using a microphone connected to the MIC
terminal, you can activate the low-cut filter to reduce the sound of blowing
wind, a car’s engine and similar ambient sounds.
terminal, you can activate the low-cut filter to reduce the sound of blowing
wind, a car’s engine and similar ambient sounds.
1 Press the MENU button.
2 Open the [MIC Low Cut] submenu.
[¡ Audio Setup] > [2] > [MIC Low Cut]
3 Select the desired option and then touch [X].
Microphone Attenuator (Built-in Microphone)
You can activate the microphone attenuator (20 dB) for the built-in
microphone to prevent audio from being distorted if the audio level is too
high.
microphone to prevent audio from being distorted if the audio level is too
high.
1 Press the MENU button.
2 Open the [Built-in Mic Att.] submenu.
[¡ Audio Setup] > [2] > [Built-in Mic Att.]
3 Select the desired option and then touch [X].
Options
[i On]:
The microphone attenuator will be activated at all times to reproduce more faithfully the sound
dynamics.
dynamics.
[j Off]:
The microphone attenuator will be deactivated at all times.
[i On]:
The built-in microphone attenuator will be activated at all times to reproduce more faithfully the
sound dynamics.
sound dynamics.
[j Off]:
The built-in microphone attenuator will be deactivated at all times.
[¡ Audio Setup]
[2]
[MIC Att.]
[j Off]
[¡ Audio Setup]
[2]
[MIC Low Cut]
[
j
Off]
[¡ Audio Setup]
[2]
[Built-in Mic Att.]
[j Off]