Canon PowerShot G5 X 사용자 매뉴얼

176

To utilize the features of the following software, download the software 

from the Canon website and install it on your computer.

 

●

CameraWindow

 -

Import images to your computer

 

●

Image Transfer Utility

 -

 

●

Map Utility

 -

Use a map to view GPS information that has been added to images

 

●

Digital Photo Professional

 -

Browse, process and edit RAW images

 

●

To view and edit movies on a computer, use preinstalled or 
commonly available software compatible with movies recorded by 
the camera.

 

●

Image Transfer Utility can also be downloaded from the Image 
Sync settings page of CANON iMAGE GATEWAY.

The software can be used on the following computers. For detailed 

system requirements and compatibility information, including support in 

new operating systems, visit the Canon website.

 

●

Windows 8/8.1

 

●

Windows 7 SP1

 

●

Mac OS X 10.10

 

●

Mac OS X 10.9

*1  E-TTL mode is used for the flash.

*2  M mode is used for the flash.  

In [ ] shooting mode, E-TTL mode is also available for the flash. In this case, 

when the flash fires, flash exposure compensation set on the flash is applied to 

the flash output level set on the camera.

*3  Can be configured only when [Flash Mode] is [Auto] and flash exposure 

compensation set on the flash is [+0]. When you adjust flash exposure 

compensation on 600EX-RT, 600EX, 580EX II, or 430EX II Speedlites, the 

camera display will be updated accordingly.

*4  Can be configured when [Flash Mode] is [Manual]. Linked to settings on the 

flash unit.

*5  1/64 for Speedlite 430EX II/430EX/320EX/270EX II/270EX.

*6  Configure other options on the flash unit itself. Available with Speedlite 

580EX II/600EX-RT/600EX/90EX. When this item is not set to [Off], [Shutter 

Sync.] cannot be set to [2nd-curtain]. (If [Shutter Sync.] is set to [2nd-curtain], it 

will be changed to [1st-curtain].)

*7  Can only be configured when [Flash Mode] is [Auto].

*8  Restores all default settings. You can also restore defaults for [Safety FE] and 

[Red-Eye Lamp] by using [Reset All] on the [ 4] tab on the camera (= 165).

 

●

In [

] shooting mode, icons representing Smiling, Sleeping, 

Babies (Smiling), Babies (Sleeping), and Children shooting 
scenes determined by the camera are not displayed, and the 
camera does not shoot continuously (= 40).