Sony HVL-F45RM 사용자 매뉴얼

GB

15

GB

When the flash unit is powered, 
on-screen indicators are 
displayed on the LCD panel.

•  If the flash unit is left unused 

for 3 minutes while it is used 
alone or connected to the 
camera in a power-saving 
state, the LCD panel will 
automatically turn off to 
conserve the battery power.

•  During wireless flash 

photography with the flash 
unit used as an off-camera 
flash (page 31), the flash 
unit goes into power-saving 
mode in 60 minutes.

•  Turning off the power switch 

on the connected camera* 
automatically places the flash 
unit in power-saving mode. 
* Except for DSLR-A100

•  You can press the MENU 

button and select [POWER 
SAVE] to specify the power-
saving timer, or select [WL 
POWER SAVE] to specify 
the power-saving timer for 
wireless flash photography.

When the batteries are running 
out of power, the low-battery 
indicator is displayed on the LCD 
panel as a warning.

When 

 is blinking:

It is recommended that you 
replace the batteries. The flash 
unit, however, is still capable of 
firing in this state.

When nothing but 

 is on the 

LCD panel:
The flash unit is not capable of 
firing. Replace the batteries.