Sony HVL-F45RM 사용자 매뉴얼

44

GB

This flash unit automatically selects the appropriate flash coverage 
for the focal length of the lens on the attached camera within the 
range from 24 mm to 105 mm (auto zoom). You do not need to 
manually select the flash coverage most of the time.
When [AUTO] is displayed as the flash coverage (zoom) setting on the 
LCD panel, the auto zoom function is enabled.
•  If you use a lens with the focal length of less than 24 mm while the 

auto zoom function is enabled, [WIDE] will blink on the LCD panel.

In such a case, it is recommended that you use the built-in wide 
panel of this flash unit. To use the wide panel, gently pull out the 
wide panel along with the bounce sheet, fold down the wide panel 
to cover the flashtube, and then push the bounce sheet back into 
the flash unit.

•  [WIDE] is displayed on the LCD panel.
•  When you retract the wide panel, push it back all the way into the 

flash unit and make sure that [WIDE] is not displayed on the LCD 
panel.

•  When you pull out the built-in wide panel, do not apply excessive 

force as it may cause damage to the wide panel.