ONKYO PR-RZ5100 사용자 매뉴얼
11
> Hookup
+
−
+
−
+
−
+
−
L
R
L
R
FRONT
HEIGHT
1
For high-
frequency
frequency
For low-
frequency
frequency
Power amplifier
1 Analog audio cable
Connections with Bi-
Amping speakers
Amping speakers
The illustration at left shows an example of connection
using the PRE OUT (RCA) jacks. Refer to the illustration
at left also when connecting using the PRE OUT (XLR)
jacks. Both connections use the FRONT jacks and
HEIGHT 1 jacks. Make sure you remove the jumper bar
fitted between the woofer jacks and tweeter jacks of the
front speakers. In case of Bi-Amping connection, refer to
the instruction manual of your speakers.
using the PRE OUT (RCA) jacks. Refer to the illustration
at left also when connecting using the PRE OUT (XLR)
jacks. Both connections use the FRONT jacks and
HEIGHT 1 jacks. Make sure you remove the jumper bar
fitted between the woofer jacks and tweeter jacks of the
front speakers. In case of Bi-Amping connection, refer to
the instruction manual of your speakers.
Setup
0 Bi-Amping connection requires you to change
some settings. Select "Yes" in "Bi-Amp" in "1.
AccuEQ Room Calibration" (
0 Bi-Amping connection requires you to change
some settings. Select "Yes" in "Bi-Amp" in "1.
AccuEQ Room Calibration" (
Setup.