Peachtree Audio nova150 (Factory Recertified) 사용자 매뉴얼

 
The nova includes a Home Theater Bypass (HTB) input mode that is designed to integrate
the nova with a “surround-sound” system to utilize the amplifier in the nova to power the
front left and right speakers for all sources. When AUX-1 is set to HTB input mode, the
signal passes from the front left and right analog outputs of the Surround-Sound Processor
(SSP) or Audio-Video Receiver (AVR) directly to the power amplifier of the nova and the
speakers connected to it. This allows the nova to be enjoyed as an “audio-only” system
with the sources connected to it and to also be utilized when playing video sources
connected to your SSP or AVR. When this input is set to HTB input mode, the LED is lit
green - indicating that the nova’s volume control is bypassed and the volume control in the
SSP or AVR must be used to control the overall system volume level. When this input is
set to AUX-1, the LED is lit blue - indicating that the nova’s built-in volume control is in the
signal path and should be used to control overall volume level of the source connected to
this input.

 
To set up Home Theater Bypass: 
 

1. 

Turn off the Surround-Sound Processor (SSP) or Audio-Video Receiver (AVR)
and the nova. 

2. 

Connect the front LEFT and RIGHT preamp output from the SSP or AVR to the
AUX-1/HTB input on the nova. 

3. 

Turn on the nova and select the AUX-1/HTB input. 

4. 

Press and hold the AUX-1/HTB button for ~5 seconds to engage the HTB input 
mode, indicated by the input LED turning green. 

5. 

Turn on your SSP or AVR and calibrate its output levels with the HTB input on the 
nova selected. This will ensure that the relative output levels of all the speakers 
are maintained when watching video. 

 
When listening to sources connected to your SSP or AVR, simply select the AUX-1/HTB 
input on the nova. When listening to any other sources connect to the nova, simply press 
the corresponding input button. 
 
Caution: when the nova is in HTB input mode, the SSP or AVR is in complete control of the
overall system volume level. If extra care is not taken, significant damage to the speakers
or power amplifier may occur. Peachtree Audio does not accept any responsibility for
damage caused by improper setup or use of this feature. 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 

Connect Line-level (RCA style) front left 
and right outputs from the SSP or AVR to 
the AUX-1/HTB input on the nova.