MartinLogan Motion® 4i 사용자 매뉴얼

5

should not be placed directly beside or atop a 
CRT television.

Toe-In: When installed on a surface and used as 
front channels we recommend aiming your speak-
ers towards the primary listening position.

INSTALLING ON A WALL
If the speaker is being mounted approximately AT 
EAR LEVEL, the speaker should be oriented with 
the tweeter at top. This will disperse sound directly 
towards the desired listening area (fig. 5).

If the speaker is being mounted ABOVE EAR LEVEL, 
the speaker should be oriented with the tweeter at 
bottom. This will disperse the sound down at a 20° 
angle towards the listening area (fig. 5).

Note: These instructions assume the mounting 
surface is standard wood frame and sheet rock 
construction. If you wish to mount to another type 
of surface, consult a bonded contractor.

Required hardware (included):
•  (1) Installation template
•  (1) Wall bracket
•  (1) Wall bracket spacer (Motion 4 only)
•  (1) Shoulder bolt
•  (2) Wall pads

Required tools/hardware (not supplied):
•  (2) 1.5-inch Phillips sheet metal screws
•  (2) Sheet rock anchors
• Ruler
• Level
•  Electric drill and 1/4” and 1/8” drill bits
• Phillips 

screwdriver

1  Screw the shoulder bolt into the back (fig. 6).

2  Affix the wall pads to the back of the speaker 

at the lower contact points (fig. 7).

20°