Sony HT-CT290 사용자 매뉴얼

19

US

If the system is connected to a TV’s 
HDMI IN jack compatible with Audio 
Return Channel, you can listen to TV 
sound from the speakers of the system 
without connecting an optical digital 
cable.

If the TV is not compatible with Audio 
Return Channel, an optical digital cable 
needs to be connected (Refer to the 
supplied Startup Guide). 

When you play content on a device 
(Blu-ray Disc player, “PlayStation®4”, 
etc.) connected to the TV, the system 
and TV are turned on automatically, the 
input of the system is switched to the 
input for the TV, and sound is output 
from the speakers of the system.

• If the TV sound was output from the 

speakers of the TV the previous time you 
watched the TV, the system does not turn 
on and the sound and picture are output 
from the TV even if device content is 
played.

• Depending on the TV, the beginning part 

of content being played may not play 
correctly.

Using the “BRAVIA” Sync 
function

In addition to the Control for HDMI 
function, you can also use the following 
function on devices compatible with the 
“BRAVIA” sync function.
• Scene Select function

This function is proprietary function of 
Sony. This function cannot operate with 
products other than those manufactured 
by Sony.

The sound field of the system is 
automatically switched according to the 
TV’s Scene Select or Sound Mode 
function settings. For details, refer to 
the operating instructions of your TV. 
Set the sound field to “CLEAR AUDIO+” 
(page 14).

• Use a High Speed HDMI cable. If you 

use a Standard HDMI cable, 1080p 
content may not be displayed 
properly.

• Use an HDMI-authorized cable.
• Use a Sony High Speed HDMI cable 

with the Cable Type Logo.

• We do not recommend using an 

HDMI-DVI conversion cable.

• Check the setup of the connected 

equipment if an image is poor or the 
sound does not come out of the 
equipment connected via the HDMI 
cable.

• Audio signals (sampling frequency, bit 

length, etc.) transmitted from an HDMI 
jack may be suppressed by the 
connected device.

• Sound may be interrupted when the 

sampling frequency or the number of 
channels of audio output signals from 
the playback equipment is switched.