Oppo UDP-205 사용자 매뉴얼

다운로드
페이지 103
S E T U P   M E N U   O P T I O N S  
 
78 
NOTE 
• 
SSID is short for Service Set Identifier. It is an identifier for each wireless router or 
access point, and is also referred as a network name
 
• 
WPS  is short for Wi-Fi Protected Setup (WPS). It is the latest standard  for easy 
and secure wireless home network configuration.  It is also named Wi-Fi Simple 
Config
. To use WPS, a WPS compatible router or access point is required. 
 
5.  IP Setting: Determines how the player obtains its IP address. 
 
• 
Auto (DHCP) – The player automatically obtains its IP address information using DHCP 
(Dynamic Host Configuration Protocol). This is the default setting. In most cases, automatic IP 
configuration should be used.   
• 
Manual – Allows you to manually enter the numeric IP address. Set the IP configuration 
manually only when the router has no DHCP server functions or when the router’s DHCP 
server function is disabled. For more information on how to manually configure the Internet 
connection and what values to use, please consult your broadband router/modem instruction 
manuals or call your Internet service provider. 
  Internet Connection – Depending on the setting in Internet Connection, this can be 
either “Wireless” or “Ethernet”.   
  IP Address: The Internet Protocol address of the player. When IP Setting is set to Auto 
(DHCP), the value displayed here is obtained using DHCP and cannot be changed.  
  Subnet Mask: Each IP address has an associated subnet mask. It is used by the player to 
decide whether to route network traffic through the router or directly to another device on 
the same network. When IP Setting is set to Auto (DHCP), the value displayed here is 
obtained using DHCP and cannot be changed. 
  Gateway: The IP address of the router. It is also called “default gateway” or “default 
router”.  When IP Setting is set to Auto (DHCP), the value displayed here is obtained 
using DHCP and cannot be changed. 
  DNS 1: The IP address of the primary DNS (Domain Name System) server. DNS is the 
mechanism used to translate human-readable addresses (such as www.oppodigital.com) 
to numeric IP addresses. When IP Setting is set to Auto (DHCP), the value displayed 
here is obtained using DHCP and cannot be changed. 
  DNS 2: The IP address of the secondary DNS server. When IP Setting is set to Auto 
(DHCP), the value displayed here is obtained using DHCP and cannot be changed. 
 
6.  Proxy Setting: Allows you to configure the proxy server settings. The proxy server works as an 
intermediary for network communication between clients and other servers, which can provide 
benefits like security, anonymity, or even circumvention of regional restrictions. 
• 
On – Accesses the Internet via a proxy server.   
  Proxy Host: Input the proxy host name using the remote control. 
  Proxy Port: Input the proxy host port number using the remote control. 
• 
Off (default) – Disables the use of a proxy server. 
We recommend keeping Proxy Setting set to Off, unless you have a working Proxy Host and 
Proxy Port, and have to use the proxy server in order to access the internet.