Benq DC E300 사용자 가이드
BenQ DC 5530 User’s Manual
Preparing Your DC E300 for Use
6
Eng
lish
e of Contents
2.2
Inserting an SD Memory Card (optional accessory)
The camera comes with 16MB (14MB available for
image storage) of internal memory, allowing you to
store images and video clips in the camera. However,
you can expand the memory capacity by using an
optional SD (Secure Digital) memory card so that you
can store additional images and video clips.
image storage) of internal memory, allowing you to
store images and video clips in the camera. However,
you can expand the memory capacity by using an
optional SD (Secure Digital) memory card so that you
can store additional images and video clips.
1. Make sure the camera is turned off.
2. Insert an SD memory card:
2. Insert an SD memory card:
• The front side of the memory card (printed
arrow) should face towards the rear side of the
camera.
camera.
• If the card cannot be inserted, check the orientation.
2.3
To remove a memory card:
Make sure the camera is turned off. Press lightly on
the edge of the memory card and it will eject.
the edge of the memory card and it will eject.
Note
•
Be sure to format the memory card with this camera before its initial usage. Refer to
section in this manual titled ìFormatting Mediaî for further details.
section in this manual titled ìFormatting Mediaî for further details.
Note
•
To prevent valuable data from being accidentally erased from an SD memory card you
can slide the write protect tab (on the side of the SD memory card) to “LOCK”.
can slide the write protect tab (on the side of the SD memory card) to “LOCK”.
•
To save, edit, or erase data on an SD memory card, you must unlock the card.