Benq DC E300 사용자 가이드
BenQ DC 5530 User’s Manual
Eng
lish
lish
MENU Options
23
4.2.4 Setup Menu
Setting
Description
Option
Date & Time
Refer to section in this manual titled “Setting the Date and
Time” for further details.
Time” for further details.
--
Beeper
The camera produces a sound (beep) each time you press a
camera button, if this function is enabled.
camera button, if this function is enabled.
On
Off
Off
Language
This option allows you to select the language for the menus
and the text display on the LCD monitor.
and the text display on the LCD monitor.
English/French/
German/Spanish/
Italian/Traditional
Chinese/Simplified
Chinese
German/Spanish/
Italian/Traditional
Chinese/Simplified
Chinese
Power Off (Auto
Power Off)
Power Off)
If there is no camera activity (no buttons are pressed) for a
defined period of time (3 minutes) while the camera is
powered on, the camera will switch to an idle mode, and
eventually turn itself off to conserve power. If the camera is
idle, re-activate the camera by pressing any button or
switch the mode dial. If the camera has powered off you
must to turn the camera on again by pressing the POWER
button.
defined period of time (3 minutes) while the camera is
powered on, the camera will switch to an idle mode, and
eventually turn itself off to conserve power. If the camera is
idle, re-activate the camera by pressing any button or
switch the mode dial. If the camera has powered off you
must to turn the camera on again by pressing the POWER
button.
1 Min
3 Min
5 Min
10 Min
Cancel
3 Min
5 Min
10 Min
Cancel
Reset
This feature gives you an option whether to restore all
camera settings to their original status or not.
camera settings to their original status or not.
Yes
No
No
Frequency
This camera supports different lighting frequencies: 50 Hz
and 60 Hz. When photographing under fluorescent
lighting, select the correct frequency setting depending in
your local area’s voltage. This function is only effective if
and 60 Hz. When photographing under fluorescent
lighting, select the correct frequency setting depending in
your local area’s voltage. This function is only effective if
you set the White Balance to
(Fluorescent) setting.
50 Hz
60 Hz
60 Hz