MINOLTA DiMAGE 2330 사용자 가이드
INSERTING THE BATTERIES - CONT’D
- 26 -
CHECKING THE BATTERY POWER
When the batteries are installed in the camera, the camera checks the battery
power automatically and shows the result on the data panel.
power automatically and shows the result on the data panel.
lights — The battery power is sufficient.
lights — Prepare the new batteries. Even
in this status, the recording or
playback can be performed.
playback can be performed.
All indicators go out and after that,
blinks
for 5 seconds and then, all indicators go out
again.
— Perform the following either operation.
again.
— Perform the following either operation.
Taking a picture or playing back cannot
perform.
perform.
• Replace all batteries with new ones.
• Remove all batteries and use the AC
• Remove all batteries and use the AC
adapter (sold separately) (see page 27).
* When nothing is displayed on the data panel, check that the batteries are
installed with a correct polarity (+/–). When nothing is displayed even though
the batteries are installed correctly, replace the batteries with new ones.
the batteries are installed correctly, replace the batteries with new ones.
D2330Z_Body_Eng.qxd.4 00.10.11 5:22 PM ページ 26