Pro-Ject Pre Box SE 3081020016 전단
제품 코드
3081020016
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Pro-Ject Pre Box SE
Pre-amplifier with remote control
Product information
Good sound from sound technology
Metal case shields the electronics from vibrational and electromagnetic interference
Optimal channel separation through dual-mono circuitry
Special low-noise ICs used
Gold plated RCA connection sockets
Outboard power supply included
Features
Remote controllable
Small size allows easy placement
Display dimmable
Four line level inputs. Optional input expander Pro-Ject Switch Box providing three additional inputs
Record- and subwoofer output
Remote power switching for connected units via on/off switch (Trigger)
Technical specifications
Frequency response:
20Hz - 20kHz (±0,2 dB)
Noise floor:
-94dB (A weighted)
THD: 0,005%
Gain: 12dB
Pre out:
Gain: 12dB
Pre out:
1 pair RCA/Phono sockets
Output voltage typically:
1V at 1kHz
Record and subwoofer out:
RCA/Phono sockets
Line-level inputs:
4 pairs RCA/Phono sockets
Input impedance:
100kohms
Trigger:
12V DC switching voltage
Trigger output:
2-pole 2,5mm ∅ co-axial jack
Outboard power supply:
16V/1.000mA AC, suitable for your country's mains supply
Power consumption:
16V/200mA AC
Dimensions W x H x D (D with sockets): 103 x 72 x 144 (150)mm
Weight:
Weight:
1.200g without power supply
The manufacturer reserves the right to alter the technical specifications without notice.
Available in silver or black finish