Rollei dr4 사용자 가이드
5
Connecting the Camera
to a Computer
After installing the software on your
computer, connect your camera to it.
computer, connect your camera to it.
1.
Make sure the camera power is
off.
off.
2.
Connect the USB cable to the
USB port of your computer.
USB port of your computer.
3.
Connect the USB cable to the
USB terminal of your camera.
USB terminal of your camera.
Your camera turns on.
For Windows XP
The first time you connect your camera to the
computer using a USB cable, the [Found
New Hardware Wizard] screen will appear.
computer using a USB cable, the [Found
New Hardware Wizard] screen will appear.
1.
Select [Install from a list or
specific location (Advanced)].
specific location (Advanced)].
2.
Select [Next].
3.
Select [Search for the best
driver in these locations.] -
driver in these locations.] -
[Include this location in the
search] and then press the
[Browse] button.
4.
Browse to the folder where the
WIA driver was installed (by
WIA driver was installed (by
default this should be
C:\Program Files\DSC
Software\WIA driver) and then
select [Next].
The WIA Driver is installed.
The [DSC 724] screen is displayed.
The [DSC 724] screen is displayed.