Misc Prosio Megashot 사용자 가이드

 

30

Section 7

 

Troubleshooting 

 

The batteries may not be installed or may be incorrectly installed: 
Check the batteries, ensure they are oriented correctly. 

 

The Battery / SD Card Cover may be open: Close the cover. 

 

The batteries may be out of power: Replace the batteries. 

 

The monitor may have been turned off: Press the right direction button 
to switch the monitor on.   

 

The LCD monitor will not work when the camera is linked to a 
television: ensure the movie cable is disconnected.   

 

Images on the monitor may be faint when viewed in bright light: Follow 
the instructions in Setting the LCD Brightness in Section 3 to adjust the 
monitor brightness. 

 

Pictures cannot be taken when the camera is saving the previous 
photo: Wait for the previous photo to be saved. 

The built-in memory or installed memory card may be full: Delete some 
images or movie clips or insert a memory card with space. 

 

Flash may be being charged: Wait for the flash to complete charging. 

 

Subjects must be at least 130 cm away for photos taken in Normal 
Mode: If the subject is closer, use Portrait Mode. 

 

Subjects must be located between 60 cm and 130 cm for photos taken 
in Portrait Mode: If a close-up photo is taking, use Macro Mode. 

In low light conditions the flash should be used: Ensure the flash 
setting is set to Auto. 

 

Subject may be beyond range of flash: Move closer to subject. 

 

The exposure setting may be wrong. Reset the exposure to setting. 

 

Flash may be too close to the subject: Move farther to subject.