Fujifilm FP-100C Silk 15200851 사용자 설명서
제품 코드
15200851
– 1 –
I N S T A N T P H O T O S Y S T E M S
AF3-129E
FUJI INSTANT COLOR FILM
New FP-100C / FP-100C SILK
1. FEATURES AND USES
The New FUJI INSTANT COLOR FILM FP-100C/FP-
100C SILK is a peel-apart-type instant color film with an
ISO speed rating of 100. As a daylight film, it is opti-
mized for shooting under sunlight or electronic flash. Its
ability to produce photos of superb quality makes this
film ideal for a wide range of commercial uses, includ-
ing product photography requiring long exposures,
microphotography, CRT image recording, and of
course identification and portrait photography. This film,
in regular size, can be used in cameras and other
photographic equipment that accept instant film with a
photo size of 85×108 mm, and those provided or fitted
with an instant camera back.
100C SILK is a peel-apart-type instant color film with an
ISO speed rating of 100. As a daylight film, it is opti-
mized for shooting under sunlight or electronic flash. Its
ability to produce photos of superb quality makes this
film ideal for a wide range of commercial uses, includ-
ing product photography requiring long exposures,
microphotography, CRT image recording, and of
course identification and portrait photography. This film,
in regular size, can be used in cameras and other
photographic equipment that accept instant film with a
photo size of 85×108 mm, and those provided or fitted
with an instant camera back.
•
Enhanced
Reciprocity
Characteristics
When Shooting
under Low Illumina-
tion and with Long
Exposure Times
•
Improved
Light-fading
Characteristics
•
Further Extended
Low-temperature
End (from 15°C to
10°C)
•
Reduced Color
Variations Caused
by Differences in
the Peeling Time
•
Reduced Color
Cast after Peeling
Features
•
Minimized decrease in
sensitivity, color balance
variations, and reduced
gradation imbalance when
used in low illumination or
long exposure situations
•
Decreased light-fading
rate of about one-fourth
that of the current film,
allowing long-term storage
under direct sunlight
•
Wider range of applica-
tions in low-temperature
environments, including ID
photo shooting during the
winter and outdoor com-
mercial photography under
severe conditions
•
Reduced color variations
even in cases of short/long
peeling time, decreasing
the number of unaccept-
able print results caused
by mistakes in the peeling
time
•
Reduced magenta cast
after peeling, making it
possible to obtain accu-
rate print results faster
2. SPECIFICATIONS
Film Speed
Color Temperature
Photo Surface Finish
Coating
Number of Prints
Color Temperature
Photo Surface Finish
Coating
Number of Prints
• ISO 100/21°
• 5500 K (daylight-type)
• Glossy and silk
• Unnecessary
• 10 per pack
• 5500 K (daylight-type)
• Glossy and silk
• Unnecessary
• 10 per pack
Size
Image Area
Photo Size
Film Pack Size
Applicable
Photo Size
Film Pack Size
Applicable
camera and
other
photographic
equipment
8.5×10.8 cm
(3
1
/
4
×4
1
/
4
in.)
[Regular size]
Approx. 73×95 mm
Approx. 85×108 mm
Approx. 88×134×18 mm
FUJI INSTANT CAMERA
Approx. 85×108 mm
Approx. 88×134×18 mm
FUJI INSTANT CAMERA
FP-14/FP-14II/FP-14 DUAL
Cameras and other
Cameras and other
photographic equip-
ment that accept instant
film with a photo size of
85×108 mm, and those
provided or fitted with
an instant camera back
(e.g. Fuji Instant Back
PA-1) and Fuji Instant
Holder PA-145.
10.2 ×13.1 cm
(4×5 in.)
[4×5 size]
Approx. 89×118 mm
Approx. 102×131 mm
Approx. 110×157×18 mm
Cameras and other
Approx. 102×131 mm
Approx. 110×157×18 mm
Cameras and other
photographic equip-
ment that accept instant
film with a photo size of
4×5 in. (102×131 mm),
and those fitted with an
instant film holder (e.g.
Fuji Instant Holder
PA-45).
3. PRECAUTIONS DURING USE
Camera Loading Precautions
•
Before loading the camera, check the development
roller and clean it if dirty.
roller and clean it if dirty.
•
Hold the film pack by the edges, as indicated. Do not
apply any pressure to the black covering paper or the
"Do not press here" mark on the back.
apply any pressure to the black covering paper or the
"Do not press here" mark on the back.
•
Always load the camera in subdued light avoiding di-
rect sunlight.
rect sunlight.
•
Hold the film pack with the film side parallel to and
facing the exposure plane and then lower the non-tab
end first into the camera back followed by the tab
end.
facing the exposure plane and then lower the non-tab
end first into the camera back followed by the tab
end.