Comp X Security Products Inc 421860 사용자 설명서
2
1
om00967
1.
Engine OFF/RUN switch
2.
Engine START switch
Figure 40. Right Handlebar Controls: FLHTCUSE3
ENGINE IDLE TEMPERATURE
MANAGEMENT SYSTEM
MANAGEMENT SYSTEM
For those riders who frequently find themselves in riding con-
ditions where the vehicle is subjected to prolonged idle condi-
ditions where the vehicle is subjected to prolonged idle condi-
tions, an optional dealer enabled engine calibration is available.
This calibration offers limited rear cylinder cooling with the
vehicle stopped while the engine is left at idle. This option is
available for original equipment engine calibrations only. See
your dealer for details.
This calibration offers limited rear cylinder cooling with the
vehicle stopped while the engine is left at idle. This option is
available for original equipment engine calibrations only. See
your dealer for details.
CRUISE CONTROL: FLHTCUSE3
Operation
The cruise control is designed to be safely operated with min-
imum movement by the rider and all rider control actions are
natural and easy.
imum movement by the rider and all rider control actions are
natural and easy.
NOTES
•
The rider always over-rides and controls the system.
•
The system will not work at vehicle speeds below 30 mph
(48 km/h) or above 85 mph (137 km/h).
(48 km/h) or above 85 mph (137 km/h).
•
The system is managed by a small computer. The
tachometer provides information to disengage the system
if the engine RPM suddenly increases.
tachometer provides information to disengage the system
if the engine RPM suddenly increases.
•
Besides the computer, the system has other components:
a stepper-motor (controlled by the computer), which
operates the throttle during CRUISE operation, a clutch
which disengages the stepper-motor during non-cruise
a stepper-motor (controlled by the computer), which
operates the throttle during CRUISE operation, a clutch
which disengages the stepper-motor during non-cruise
128 Operation