Comp X Security Products Inc 421860 사용자 설명서
®
2
3
1
om00767
1.
Wire connector/plug receptacle
2.
LED
3.
Set button
Figure 72. Garage Door Opener Receiver: FLHTCUSE3
SEAT: FLHTCUSE3
NOTE
The heated seat will automatically shut off after an hour and a
half of continuous operation to prevent overheating. To reset
the seat, park the motorcycle and turn the ignition key to OFF
for 5 minutes before restarting.
half of continuous operation to prevent overheating. To reset
the seat, park the motorcycle and turn the ignition key to OFF
for 5 minutes before restarting.
Removal
Detach passenger seat strap before removing seat. Failure
to do so can result in damage to rear fender paint. (00225a)
to do so can result in damage to rear fender paint. (00225a)
1.
Open right saddlebag cover and remove fastener from
seat strap bracket.
seat strap bracket.
2.
Pull upward on strap to free it from slot in bracket. Move
passenger seat strap to side of seat.
passenger seat strap to side of seat.
3.
Remove mounting fastener to detach seat mounting
bracket from top of rear fender.
bracket from top of rear fender.
4.
See Figure 73. Push seat rearward to free tongue from
slot in the seat.
slot in the seat.
5.
Separate the seat connector half from the power connector
half.
half.
190 Maintenance and Lubrication