Daviscomms Pte Ltd BU10 사용자 설명서

Step 1: Insert battery into the Base.

Step 2: Select Yes to enter association mode to register Tags. Alternatively, you can register the Tag from the

Main Menu > select Register Tag.
Or
Select No to return to the main screen.

Step 4: After the Tag is successfully associated with the Base, it would emit an alert (2 chirps).
Step 5: Select Done to return to the main screen and start monitoring the Tag on the Base.

Note: 1. The Tag can only associate

with the Base unit

when it is within 6 Metres

of

the Base.

2. The Tag cannot be monitored until it is associated with a Base.
3. Tags need to be re-associated every time a battery is replaced.
4. The Base does not need to be re-associated with the Tag/Tags  when batteries are replaced.

First Screen (without association)
If the Base has not been associated with any Tag, it will display the following screen for 5 seconds
after it is powered up.

Register Tag Menu
New Tags are stored in a first-in first-out order and corresponds to Tag 1 to Tag 16 in the memory.

Page 8

Step 3: Insert battery into the Tag.