Thunder Tiger Corp. TT-FHM2P4G-A16 사용자 설명서
4
1.2“Power Off Protection” function
Before operating the radio control model, always turn on first the
transmitter, then power on the model. After flight, always turn off the
model power first, followed by the transmitter. A built-in protecting
function in the Innovator TS6 prevents you from accidentally turning
off the transmitter while the model / helicopter power is still on.
transmitter, then power on the model. After flight, always turn off the
model power first, followed by the transmitter. A built-in protecting
function in the Innovator TS6 prevents you from accidentally turning
off the transmitter while the model / helicopter power is still on.
1.3Auto Power-off
If the transmitter power is left on for 3 minutes after flight without
transmitting stick movement signals, the transmitter will
automatically cut-off to save battery power.
transmitting stick movement signals, the transmitter will
automatically cut-off to save battery power.
If the transmitter battery power is too low, a short “Bi-Bi-Bi…” warning
tone will buzz and the LED indicator will also flash. It’s very
dangerous to fly the model with a low battery transmitter. Land
immediately and change batteries.
tone will buzz and the LED indicator will also flash. It’s very
dangerous to fly the model with a low battery transmitter. Land
immediately and change batteries.
1.4Low Battery Power warning
2.Stick Controls
3.Fly Mode Control Switch
4.Auto Rotation/CH6 Control Switch
5.Fly Mode POS Switch
This switch drives the 6th channel
control. On some models, it drives
the “Auto Rotation” function.
control. On some models, it drives
the “Auto Rotation” function.
Both the left and right sticks are designed to drive the 4 channels on
the receiver/helicopter. Both Mode1 and Mode2 are available for the
Innovator TS6 transmitter. Control functions are indicated below:
the receiver/helicopter. Both Mode1 and Mode2 are available for the
Innovator TS6 transmitter. Control functions are indicated below:
Positions for both “Fly Mode” and “Auto
Rotation/CH6” control switches can be
interchanged. Default position is “R” with “Fly
Mode” switch located on the right-up position /
“Auto Rotation/CH6” switch is then located on
the left-up position. Both positions can be
reversed, with “Fly Mode” switch set on “L”
(left-up position), and “Auto Rotation/CH6”
switch set on “R” (right-up position).
2
Rotation/CH6” control switches can be
interchanged. Default position is “R” with “Fly
Mode” switch located on the right-up position /
“Auto Rotation/CH6” switch is then located on
the left-up position. Both positions can be
reversed, with “Fly Mode” switch set on “L”
(left-up position), and “Auto Rotation/CH6”
switch set on “R” (right-up position).
2
additional
“Fly
Mode”
and
“Auto
Rotation/6CH” stickers are included in the
package for modifying original markings
indicated on the transmitter.
package for modifying original markings
indicated on the transmitter.
2 types of flying mode can be set up
with different flying parameters on
the Innovator control unit. Toggle
Mode switch between modes. The
switch is located on the upper right
position. You also can use the “Fly
Mode POS Switch” on the left side to
toggle changes.
with different flying parameters on
the Innovator control unit. Toggle
Mode switch between modes. The
switch is located on the upper right
position. You also can use the “Fly
Mode POS Switch” on the left side to
toggle changes.
Mode
Left Stick
Right Stick
Mode 1
Mode 2
Mode 2
Up / Down
Elevator
Throttle
Elevator
Throttle
Up / Down
Throttle
Elevator
Throttle
Elevator
Left / Right
Rudder
Rudder
Rudder
Rudder
Left / Right
Aileron
Aileron
Aileron
Aileron
Sticker
Fly Mode
Auto Rotation
CH6
Auto Rotation
CH6
Fly Mode