Lian Ying Electronic Manufactory Ltd. ARS24ST 사용자 설명서
ARS Instruction Manual
Copyright 2007 All rights reserved.
- Page 12 -
4
Setting up of ARS System
Step 1: Install the receiver
Please follow these instructions carefully for receiver regarding connecting
distance and antenna angle to ensure proper communication between the
audience remotes and the receiver.
audience remotes and the receiver.
• Plug the provided USB cable into the receiver’s USB port.
• Plug the other end of USB cable into your computer/laptop’s USB port.
• Adjust the receiving antenna can help for boosting communication range
and signal quality.
• To optimize the signal reception, it is recommended to adjust the antenna
within an angle of 140 degrees to the audience.
• Adjust the antenna to horizontal level for best reception.
• An undesirable antenna position and angle adjustment might affect signal
communication and reduce the range of communication. The client
remotes may be unable to connect to the receiver in this situation.
remotes may be unable to connect to the receiver in this situation.
Step 2: Install batteries in the remote
The battery compartment is located on the back of the remote.
1. Pull up the covers to open the compartment
2. Use 2 “AA” size batteries (Alkaline recommended)
3. Do not mix used and new batteries
2. Use 2 “AA” size batteries (Alkaline recommended)
3. Do not mix used and new batteries
4. Be sure the batteries are inserted properly
5. Drive screws into the holes of the battery compartment doors
5. Drive screws into the holes of the battery compartment doors
Precaution
Remove the batteries from the remote if it is not to be used for a long period of
Remove the batteries from the remote if it is not to be used for a long period of
time. If the batteries are used improperly their life will be shortened or their
contents may leak.
contents may leak.
Step 3: Install the ARS software
1. Login Windows with an administrator account.
2. Close all running applications.
2. Close all running applications.
•
Check whether .Net framework 1.1 has been installed under Add or
Remove Programs. If .Net framework 1.1 is not installed, install .Net
framework 1.1 from Microsoft Windows Update or from ARS installation
CD.
Remove Programs. If .Net framework 1.1 is not installed, install .Net
framework 1.1 from Microsoft Windows Update or from ARS installation
CD.
3. Setup ARS by setup.exe in our installation CD.
4. Check device manager to assure the USB driver setup completely.
5. All remotes will turn to sleep mode when it idles for 10 minutes for energy
4. Check device manager to assure the USB driver setup completely.
5. All remotes will turn to sleep mode when it idles for 10 minutes for energy
saving reason. The default is 10 minutes, if administrator wants to change
the setting; an additional setup program is required.
the setting; an additional setup program is required.