Medeco Security Locks Inc. 20736 사용자 설명서
1.
2.
3.
2.
3.
a.
b.
b.
4.
a.
1.
2.
2.
Key Firmware Update Feature
From time to time, the "firmware" (or software) that is currently installed or residing on Medeco XT keys may be updated to support new Medeco
XT Web Manager software features or enhancements. The key firmware update process is governed by the Key Client application and is
designed to occur during normal key servicing.
XT Web Manager software features or enhancements. The key firmware update process is governed by the Key Client application and is
designed to occur during normal key servicing.
The following steps outline the key firmware update process:
The keyholder returns their key to the Key Programmer for routine schedule updating.
The keyholder inserts the key into the key Programmer.
The Key Client begins the typical process to service the key.
The keyholder inserts the key into the key Programmer.
The Key Client begins the typical process to service the key.
The key is Initialized
Audits are removed from the key and stored in the database
Audits are removed from the key and stored in the database
At this point, the Key Client application will interrupt the routine scheduling process to download the file containing the new firmware to
the key.
the key.
The Key Client begins to download the new firmware file to the key.
During the entire time that the firmware file is downloaded to the key, the Client application will display a progress bar indicating
the % complete. Typically this process takes approximately 50-60 seconds.
During the entire time that the firmware file is downloaded to the key, the Client application will display a progress bar indicating
the % complete. Typically this process takes approximately 50-60 seconds.
After the file is successfully downloaded to the key, the key will retrieve the file and complete the firmware installation.
When the firmware installation is complete, a message will display to remove the key and reinsert the Key. The Key Client will complete
the final steps of the routine scheduling process.
When the firmware installation is complete, a message will display to remove the key and reinsert the Key. The Key Client will complete
the final steps of the routine scheduling process.
Key Firmware Update
As is typical during key servicing, the key should not be removed from the Key Programmer until a successful Green LED or Red LED
is illuminated on the key. For more information, please refer to the section,
As is typical during key servicing, the key should not be removed from the Key Programmer until a successful Green LED or Red LED
is illuminated on the key. For more information, please refer to the section,